Si votre tvix reste sur boot ou ne veut plus démarrer suite à un flashage du firmware voici ce qui est indiqué dans le manuel officiel pour remettre un firmware précédent ou simplement recommencer la manipulation :
Voici la procédure dans le manuel Anglais
Even if the TViX accidentally turns off during the firmware upgrade, the safe mode will enable the TViX to be re-upgraded. Please follow the steps below:
- Connect the TViX to your PC with a USB and then turn it on.
- Make a tvixfw folder in your primary partition.
- Copy the latest firmware file into the tvixfw folder of the TVIX hard drive.
- Press the SETUP button on the top panel and turn on the TViX HD Using power button.
- The VFD will show the copied firmware version, like HDD1/FW 1:01:00.
- Press OK on the remote control to start upgrading.
- The VFD will show PRE when erasing the old firmware is in process.
- The VFD will show UPG when the new firmware upgrade is in process.
- The TViX will automatically reboot after the upgrade has been successfully finished.
Ma vilaine traduction :
- Déposer le firmware que vous voulez installer à la racine du disque dur interne ou à défaut à la racine d'une clef USB
- Tenir le bouton setup enfoncé pendant que vous allumez le Tvix
- L'afficheur doit vous montrer le firmware qu'il a trouvé
- Appuyez sur ok pour commencer le flashage de celui-ci
- L'afficheur affiche PRE lorsqu'il est en train d'effacer la mémoire interne du tvix
- L'afficheur affiche ensuite UPG pour dire qu'il est en train d'écrire le firmware choisie dans la mémoire
- Le tvix redémarre tout seul quand il a fini
A+
Derniers commentaires
samedi, mars 23 2024,05:57
samedi, mars 23 2024,05:36
samedi, mars 23 2024,05:28
samedi, mars 23 2024,04:50
samedi, mars 23 2024,04:20
samedi, mars 23 2024,04:13
mardi, mars 19 2024,04:42
mercredi, mars 13 2024,20:43
jeudi, décembre 10 2015,02:54
mercredi, janvier 19 2011,15:15